Anonymous

How To Make A Spear?

5

5 Answers

Anonymous Profile
Anonymous answered
Go out into the woods or forest and see if you can find a staight stick growing out from the roots of a tree(don't no type of tree), the bottom is a lot stronger so cut the stick down but make sure it is straight.  Next slice you knife down it making sure you take of all the bark, knots, leaves and bumps. After snap the stick approximately where the bottom of the stick becomes dramatically smaller. After that sharpen the tip of the stick. Done, you can make a rabbit stick(small throwing stick) from the smaller bit.
Muddassar Memon Profile
Muddassar Memon answered
To make a spear you will need the following material: cardboard gift wrap roll, Styrofoam meat tray, pair of scissors, some tape, black-brown or grey color paint.

Now follow this method to make a spear: Cut the gift wrapping roll all the way up the length so that it can't roll any more. Now re-roll it as tight as possible, rolling it diagonally is the best method now tape this roll as tight as possible with a masking tape (try using masking tape because it can be painted). This will make the shaft of the spear. Now cut a cardboard piece into a triangular shape (this will make the head of the spear). Now stick this piece to the shaft that we have made. After this is done all you have to do is choose the color that you would like the spear to be in Black or Grey and paint the spear with these colors, make sure that the head of the spear (triangular part) is grey in color.
Anonymous Profile
Anonymous answered
First all you do is find pretty long stick from the ground or  you may have to cut it down from a tree, after that you need to make sure its all even if its not you must cut off all the uneven parts with a knife after that you need some sand paper so you can sand the whole spear and next all you have to do is pick one side between the bottom or top of the stick and when you do start sharpening that side after that then your good to go and hunt.
Anonymous Profile
Anonymous answered
Get a stick that is easy to work with.

Take one end of the stick and start  whittling it.Make shear you only scrap a little bark  off the stick .Then sharpen one end of the stick  make sheare it is allways sharpen because you might need it!!!!!!

Answer Question

Anonymous